Skip to content

Cause

Faulty fuel additive control module

The module governing the additive system, faulty so dosing is not commanded or not tracked. It is a small dedicated controller on the vehicles that carry one, and its faults surface as invalid data reported by the engine module rather than as anything the driver perceives.

The consequence is the same as an empty tank: no additive reaches the fuel, the filter's regeneration temperature stays high, regenerations are aborted, and the filter loads. So the visible fault is a particulate filter problem and the cause is a module two steps upstream.

Rule out the system before the module. An empty tank, a counter that was never reset, a blocked dosing line and a failed pump all produce module-level faults — and the module refusing to dose is usually correct behaviour rather than a failure. Check the level, the counter and the pump's delivery first, since all three are cheaper and commoner than the controller.

Typically specialist work. Needs equipment or training most home workshops do not have.

WhatsApp Telegram X Email

Codes this can cause (2)

Codes where this is a likely explanation first, rather than merely a possible one.

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Others who found this

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Faulty fuel additive control module.