P0D0B: Battery Charging System Positive Contactor A Control Circuit Range/Performance
What to do
As P0D07. These are the charging contactors rather than the pack's main pair, so a car with this fault may drive perfectly and simply refuse to charge. High-voltage work throughout.
What this code means
The command circuit for the positive charging contactor is responding out of specification. The charging contactors, and how they differ from the pack's main pair, are at P0D07; why both poles are switched is at P0D0E.
Likely causes
Start here
- Faulty battery contactor · specialist
- Corroded or loose connector · specialist
Less common
- Blown fuse or failed supply · easy
- Damaged wiring harness · specialist
- Faulty on-board charger · specialist
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P0D0B.