Перейти к содержимому

B00E3 Высокая Общий / SAE

B00E3: Преднатяжитель ремня безопасности второго ряда слева C — управление срабатыванием

WhatsApp Telegram X Электронная почта

Что делать

Get this looked at promptly, and do not attempt it yourself. A restraint fault usually means the whole system has switched itself off, so the airbags and pretensioners may not fire in a crash — the car drives normally and is far less able to protect you. Never probe airbag wiring with a multimeter: the current an ordinary meter uses can set off the charge. Rear-seat belts usually have no airbag working alongside them, so their pretensioners matter more than most people assume.

Что означает этот код

The deployment loop for the second row left seat belt pretensioner C is faulty.

A second or third pretensioner on one belt is not redundancy — each acts in a different place.

A retractor pretensioner winds slack back onto the reel. A buckle pretensioner pulls the buckle stalk down. An anchor pretensioner tightens the lap section at the floor. Together they remove slack from the whole belt rather than from one end of it, and the module fires them in a planned order.

Which is why losing one is treated as a fault rather than as reduced capability. A belt tightened at one end only pulls the occupant into a geometry the restraint system was not designed around — and on a rear seat, where there is no airbag to catch what the belt gets wrong, the belt is doing the whole job alone.

That last point is the one worth carrying about rear-seat restraints generally. Front occupants have belts and bags tuned together. Most rear occupants have the belt and nothing else, so its pretensioner and limiter are not a supplement to anything — they are the restraint.

Вероятные причины

Начните отсюда

Встречается реже

Симптомы

Задействованные компоненты

Информация, а не инструкция

CarGeek — это справочник, а не руководство по ремонту. Его страницы составлены по открытым источникам и по опыту других людей, но не по сервисной документации производителя, поэтому для вашего конкретного автомобиля они могут быть неверными или неполными. Часть описанного связана с реальной опасностью: высокое напряжение, топливо под давлением, накопленная энергия, горячие и движущиеся детали.

Всё, по чему вы собираетесь действовать, сначала проверьте с человеком, имеющим техническую подготовку, по собственной процедуре производителя для вашего автомобиля. Ничто здесь не заменяет эту процедуру.

Опыт сообщества

Напишите об этом первым

Об этом пока ничего не опубликовано. Всё, что вы выяснили, стоит записать — даже тупиковый путь сэкономит кому-то те же полдня.

Что делает такой отчёт полезным:

  • Автомобиль — марка, модель, год и двигатель. Одна и та же неисправность ведёт себя на каждом по-своему.
  • Что вы измерили, а не только что заменили.
  • Что действительно помогло — или что не помогло ничто, это тоже стоит знать.

Войти или создать учётную запись для добавления того, что вы выяснили по теме B00E3.