Mercedes-Benz ECO Gear (TSG 360 / TSG 480)

6-speed manual · longitudinal · 2006–present

Also known as: eco gear, ecogear, eco gear 360, eco gear 480, tsg 360, tsg 480, tsg360, tsg480

Mercedes-Benz's six-speed manual for its rear-drive vans — the Sprinter, the Vito and the Viano — sold under the ECO Gear name and carried in the workshop documents as TSG.

The number is the torque rating in newton-metres, and it tells you which of two gearboxes a van has. The ECO Gear 360 goes behind the four-cylinder diesels, including the 300 Nm and 330 Nm versions; the heavier-duty ECO Gear 480 goes behind the V6 — the OM642 — whose output the 360 would not stand. They are not interchangeable in the sense that matters: a 480 is specified because the engine in front of it needs one.

The name is an economy claim rather than a badge, and the two things behind it are stated by Mercedes plainly enough to repeat: a wide ratio spread — a low first and a tall sixth, so the van pulls away loaded and cruises unstressed — and a low-friction oil. Together they were credited with something in the region of half a litre to a full litre per hundred kilometres against the gearbox they replaced.

Do not confuse it with the G56, which is Mercedes' other six-speed manual of the period and has its own page here: that is the heavy unit sold to Dodge for the Ram, and it is a different gearbox for a different vehicle.

The low-friction oil is a specification, not a preference. A van refilled with ordinary gear oil will not fail, but the economy the name refers to is the first thing it loses, and a notchy cold change is the usual first complaint.

Cars fitted with this gearbox

2 generations. Only where a source names the model and the generation together — a gearbox is documented as a product far more often than as a fitment, so this list is deliberately shorter than the truth.

Mercedes-Benz

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

The car — make, model, year and engine. The same fault behaves differently on each.
What you measured, not only what you replaced.
What actually fixed it — or that nothing did, which is worth knowing too.