Cause
Failing crankcase breather loading the intake with moisture
A crankcase ventilation system passing water vapour and oil mist into the intake instead of separating it. The crankcase always contains water — a product of combustion that condenses on cold metal — and the ventilation system is supposed to draw it off and burn it once the engine is warm.
Short journeys are what defeat it. An engine that never reaches full temperature never evaporates the condensate, so it accumulates as an emulsion, and the breather passes moisture into the intake where it fouls the airflow sensor and can freeze in cold weather. A mayonnaise-like deposit under the oil filler cap is the classic sign, and it points at usage rather than at a head gasket in most cases.
The consequences reach the sensors. A wet airflow element under-reports, an intake temperature sensor responds oddly, and in freezing conditions ice in the breather can pressurise the crankcase and push oil past a seal. Check the breather's separator and any heater fitted to it, and treat the driving pattern as part of the diagnosis.
Typically a moderate job.
Codes this can cause (2)
Codes where this is a likely explanation first, rather than merely a possible one.
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Others who found this
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about Failing crankcase breather loading the intake with moisture.