Cause
Faulty power steering pressure sensor
The sensor reporting hydraulic pressure in a conventional power steering system — and its purpose is not steering at all, which is what makes it worth understanding.
Its job is to warn the engine. Turning the wheel at parking speed loads the steering pump heavily, and that load is enough to pull an idling engine down and stall it. The sensor tells the engine module that a large load is arriving so it can raise idle speed to meet it.
So the characteristic symptom is an engine problem rather than a steering one: a stall or a dip in idle when the wheel is turned at low speed, particularly with the air conditioning also running. A car that stalls while parking is very often this, and it is looked for in the idle control system rather than the steering.
The sensor sits in the high-pressure line, so leaks at its fitting are as common as electrical failure, and a weeping sensor is often found by the fluid loss rather than the code.
One check comes first and is free: the fluid level and condition. Low or aerated fluid produces erratic pressure the sensor honestly reports, and the same low level makes the pump whine and the steering heavy at low speed. Dark, burnt-smelling fluid is a system that has been running hot, which points at a restriction rather than at the sensor.
Typically a moderate job.
Codes this can cause (6)
Codes where this is a likely explanation first, rather than merely a possible one.
- P0550 Power Steering Pressure Sensor/Switch Circuit Likely for this code Low
- P0551 Power Steering Pressure Sensor/Switch Circuit Range/Performance Likely for this code Low
- P0552 Power Steering Pressure Sensor/Switch Circuit Low Likely for this code Low
- P0553 Power Steering Pressure Sensor/Switch Circuit High Likely for this code Low
- P0554 Power Steering Pressure Sensor/Switch Circuit Intermittent Likely for this code Low
- U0420 Invalid Data Received From Power Steering Control Module A High
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Others who found this
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about Faulty power steering pressure sensor.