Cause
Soot contamination in the sensor port
Soot packed into the small passage connecting a sensor to the exhaust stream, so the sensor is sealed off from what it is supposed to measure. The reading it then produces is the most dangerous kind: stable, plausible and no longer connected to reality. Nothing about it looks like a failure, which is why it survives inspection and gets diagnosed as a healthy sensor reporting a genuine condition.
A blocked pressure port is the clearest case. The sensor sits away from the heat with a steel pipe running to the exhaust, and that pipe sooting up leaves the reading frozen near whatever it last saw. Differential pressure across the filter then appears normal regardless of load, and the module either never regenerates or regenerates constantly. A pressure reading that barely moves between idle and load is the signature.
Temperature and particulate sensors fail the same way for a different reason. A soot-coated element responds slowly rather than wrongly, so correlation checks between neighbouring sensors trip while each reading, taken alone, looks reasonable. Clear and inspect the port whenever a sensor in this system is suspected — it costs nothing, and fitting a new sensor into a blocked port reproduces the fault exactly.
Typically a moderate job.
Codes this can cause (5)
Codes where this is a likely explanation first, rather than merely a possible one.
- P040B Exhaust Gas Recirculation Temperature Sensor A Circuit Range/Performance Likely for this code Moderate
- P040F Exhaust Gas Recirculation Temperature Sensor A/B Correlation Likely for this code Moderate
- P245F Particulate Filter Pressure Sensor B Circuit Range/Performance Likely for this code Moderate
- P24DA Particulate Matter Sensor Exhaust Sample Error Bank 1 Moderate
- U02A3 Lost Communication With Particulate Matter Sensor Moderate
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Others who found this
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about Soot contamination in the sensor port.