Skip to content

P0608 Moderate Generic / SAE

P0608: Control Module Vehicle Speed Sensor Output A

WhatsApp Telegram X Email

What to do

Driveable, with a speedometer or cruise control that may not work. Mention any aftermarket device wired into the vehicle — trackers and alarms commonly tap this circuit and are a frequent cause.

What this code means

A fault in the road speed signal the engine module sends out to other systems. The distinction from P0500 matters: that code concerns the speed signal arriving, this one concerns the module's own output of it to the instrument cluster, cruise control or an aftermarket device.

A short in that output circuit is a common cause, and aftermarket installations are worth asking about — trackers, speed limiters, taxi meters and alarms frequently tap this wire, and an installation that has chafed or shorted produces exactly this.

Likely causes

Start here

Less common

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P0608.