Pular para o conteúdo

O conteúdo de referência é exibido em inglês enquanto sua tradução está sendo escrita.

Subaru EJ (1.5–2.5)

flat-4 · turboalimentado · gasolina · 1989–2021

WhatsApp Telegram X E-mail

Também conhecido como: ej20, ej25, ej205, ej257, 2.0 boxer turbo, sti engine, wrx engine, ej253, ej22, ej22t, ej20t, ej255, ej15, ej16, ej18, ej204, ej207, ej251, el15

The flat-four that defined Subaru for thirty years — naturally aspirated in the Impreza and Forester, and turbocharged in the WRX and STI, where it became one of the most modified engines in the world.

Head gasket failure is the fault the family is known for, particularly on the 2.5 naturally aspirated versions of the late 1990s and 2000s. The presentation is often external — coolant or oil weeping at the side of the block — rather than the classic mayonnaise-under-the-cap, so the layout changes what the symptom looks like.

On the turbocharged versions the additional and more expensive theme is ringland failure, where detonation damages the piston between the ring grooves. It is strongly associated with modification, poor fuel and heat, and it presents as a sudden misfire with low compression on one cylinder. Because these engines are modified so routinely, establishing what boost and software the car is running is the first question on any knock or misfire complaint, ahead of any component test.

It is a family spanning 1.5 to 2.5 litres, and the cars listed below carry the EJ15, EJ16, EJ18, EJ20, EJ22 and EJ25 between them. The head-gasket reputation belongs to the 2.5 naturally aspirated engines and the ringland failures to the turbocharged 2.0 — so a fault quoted for the EJ is almost always a fault quoted for one member of it.

Carros equipados com este motor

18 gerações, em 2 marcas. Do catálogo editorial: um carro ausente significa que o catálogo ainda não chegou a ele, não que o motor nunca tenha sido montado.

Informação, não instrução

O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.

Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.

Publicações sobre este motor

Seja o primeiro a documentar isto

Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.

O que faz valer a leitura:

  • O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
  • O que você mediu, não só o que trocou.
  • O que realmente resolveu — ou que nada resolveu, o que também vale saber.

Entrar ou criar uma conta para adicionar o que você descobriu sobre EJ (1.5–2.5).