Cause
Particulate filter heavily loaded with soot
A filter carrying more soot than it should, but soot that will still burn — the recoverable state, as distinct from a filter permanently restricted by ash. Keeping the two apart matters because they look identical to the driver and cost very differently to put right: this one is usually solved by allowing a regeneration to complete, and the other is solved by a new filter.
It is a consequence rather than a fault in itself. Soot loads faster than it burns when journeys are too short for the exhaust to reach regeneration temperature, when regenerations are begun and repeatedly interrupted, or when something upstream is producing excess soot — worn injectors, a leaking turbocharger seal, a stuck exhaust gas recirculation valve. So a heavily loaded filter is a question, not an answer.
Its effects reach well beyond the filter. A high load raises the temperature the system will tolerate during regeneration and pushes exhaust temperatures up across the aftertreatment, which is why this cause appears on over-temperature codes and on catalyst codes rather than only on filter codes. Check the load percentage and the count of incomplete regenerations together — a high load with many aborted attempts names the fault far better than either figure alone.
Typically a moderate job.
Codes this can cause (5)
Codes where this is a likely explanation first, rather than merely a possible one.
- P032F Combustion Engine Producing Insufficient Torque Likely for this code High
- P214D SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration Likely for this code High
- P244D Exhaust Temperature Too High For Particulate Filter Regeneration Bank 1 Likely for this code High
- P24A4 Particulate Filter Restriction - Soot Accumulation Too High Bank 1 Likely for this code High
- P24A2 Particulate Filter Regeneration Incomplete Bank 1 Moderate
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Others who found this
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about Particulate filter heavily loaded with soot.