Skip to content

Cause

Road damage to underfloor wiring

Impact or abrasion to a loom running beneath the vehicle — kerbs, road debris, or a jack placed on it. Salt and water then enter the damaged section, so the fault typically worsens across a winter rather than appearing all at once.

Typically a moderate job.

WhatsApp Telegram X Email

Codes this can cause (83)

Codes where this is a likely explanation first, rather than merely a possible one.

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Others who found this

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Road damage to underfloor wiring.