P2352: Cylinder 10 Pressure Sensor Circuit
What to do
As P2348 — wiring first, and the sensor is a pressure-sensing glow plug on most diesels.
What this code means
The pressure sensor inside cylinder 10 has failed its circuit checks. The whole P2348 picture applies — direct combustion measurement, the glow plug integration on diesels, V10/V12 territory, and inference as the graceful fallback.
Likely causes
Start here
- Open circuit in sensor wiring · moderate
- Corroded or loose connector · easy
Less common
- Faulty cylinder pressure sensor · moderate
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P2352.