P2A72: Alternative Fuel Hydraulic Fuel Pump Select Valve Control Circuit Low
What to do
The car will run on petrol. This is a liquid-injection gas system, which is less common than the usual vapour type — make sure whoever works on it knows the difference, because the hardware and the pressures are not the same.
What this code means
The control circuit for the hydraulic fuel pump's select valve is faulty.
A hydraulic fuel pump on a gas system means this is a liquid injection installation, which is a different and more sophisticated thing from the vapour systems the rest of this range describes.
Ordinary LPG conversions vaporise the fuel and inject it as a gas into the inlet manifold. That works, and it costs a little power — gas displaces air, so the engine breathes less of it. Liquid injection keeps the fuel liquid all the way to the injector and sprays it into the port, which recovers that power and actually cools the incoming charge as it flashes to vapour.
The price is that liquid LPG must be kept above its boiling point pressure the whole way, or it vaporises in the line and the injectors deliver nothing. That is what the hydraulic pump is for — it raises tank pressure by several bar so the fuel stays liquid regardless of temperature.
And it is why this hardware has its own pressure sensors and its own select valves. The system has to know it is maintaining that margin continuously, because losing it does not degrade fuelling gradually — the fuel flashes to vapour and delivery collapses at once, usually under sustained load on a hot day, which is exactly when nobody wants it.
These are less common installations, mostly factory or high-end aftermarket, and they need an installer familiar with liquid systems specifically. A workshop used to vapour conversions may not recognise the hardware.
The select valve is what routes fuel to or around the pump, so a fault here means the system cannot guarantee liquid delivery and will decline to use it.
At or below the lower limit, usually a short to earth.
Likely causes
Start here
- Faulty alternative fuel hydraulic pump · specialist
- Corroded or loose connector · specialist
Less common
- Open circuit in control wiring · specialist
- Control module driver failure · specialist
- Damaged wiring harness · specialist
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P2A72.