Skip to content

Knock Sensor

A piezoelectric microphone bolted to the block, listening for the sharp rap of detonation so the module can retard timing the instant it starts. Unusually sensitive to mounting: incorrect torque, or anything trapped between sensor and block, stops it hearing the engine properly — a sensor replaced without the specified torque often re-sets the same code.

Also known as: ks, detonation sensor, pinking sensor, pinging sensor, knock sensors, combustion vibration sensor, knock sensor 1, knock sensor 2, bank 1 knock sensor, bank 2 knock sensor

Referenced by 35 codes

WhatsApp Telegram X Email

Codes involving this component (35)

Other components in Ignition

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Knock Sensor.