Skip to content

P0003 High Generic / SAE

P0003: Fuel Volume Regulator A Control Circuit Low

WhatsApp Telegram X Email

Do not keep driving

Expect starting trouble or reduced power. Have it diagnosed before driving further.

What this code means

Voltage on the fuel volume regulator control circuit has fallen below the expected range, which normally means the circuit is shorted to ground somewhere between the module and the regulator. Chafed harness sections where the loom passes over the engine are the usual culprit, since this circuit runs through a hot, vibrating environment.

Likely causes

Start here

Less common

Rare

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P0003.