Skip to content

P0714 Moderate Generic / SAE

P0714: Transmission Fluid Temperature Sensor A Circuit Intermittent

WhatsApp Telegram X Email

What to do

Shift quality may change from journey to journey with no obvious pattern. Worth fixing before it becomes permanent — and mention if the vehicle has recently had transmission work, since a connector disturbed and not fully reseated is a common trigger.

What this code means

The fluid temperature signal is dropping out or jumping erratically rather than failing outright. The gearbox connector is the first suspect: it sits in a hot, wet, vibrating place, and on many transmissions the internal harness passes through a sealed pass-through connector where fluid can wick along the wire strands and separate a crimp from the inside. That failure is invisible externally and produces exactly this kind of unstable reading.

Likely causes

Start here

Less common

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P0714.