P0976: Shift Solenoid B Control Circuit Low
What to do
Expect specific gears to be missing. Note which ones still work.
What this code means
Shift solenoid B's control circuit reads below its valid range, normally a short to ground, and the module shuts that output driver down.
Likely causes
Start here
- Wiring shorted to ground · moderate
- Short circuit in a transmission solenoid · moderate
- Fluid tracking into the transmission connector · moderate
Less common
- Faulty transmission control module · specialist
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P0976.