Skip to content

P2239 High Generic / SAE

P2239: O2 Sensor Positive Current Control Circuit High Bank 1 Sensor 1

WhatsApp Telegram X Email

What to do

Expect worse economy and possibly reduced power. Ask for the connector terminals to be checked as well as the wiring — a terminal that has backed out of its housing gives this code and costs nothing to correct.

What this code means

The positive current control circuit reads above its valid range — a short to supply, or a circuit the module cannot pull down when it expects to.

As with the open variant, the practical first check is the connector rather than the sensor. These plugs are handled during any exhaust or manifold work and their locking tabs become brittle with heat, so a terminal pushed back in its housing is a routine finding and produces the same reading as a short.

Likely causes

Start here

Less common

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P2239.