P2467: Exhaust Gas Temperature Sensor Circuit Range/Performance — Bank 2 Sensor 3
What to do
As P2080 — quiet code, real stakes on a filter-equipped diesel.
What this code means
Sensor 3's reading is alive but implausible — the P2080 drift argument at the third position, with the cold-start ambient-agreement check convicting the drifter for free, and the regeneration stakes attached wherever the sensor brackets the filter.
Likely causes
Start here
- Sensor drifted out of calibration · moderate
- Faulty exhaust gas temperature sensor · moderate
Less common
- Exhaust heat damage to sensor harness · moderate
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P2467.