P2A4B: Temperatuursensor voor alternatieve brandstof — circuit
Wat te doen
Expect worse economy on gas, and possibly a car that runs noticeably differently in hot or cold weather. It will fall back to petrol if the system gives up. Mention whether the problem is seasonal — that detail points straight here.
Wat deze code betekent
The circuit for the gaseous fuel temperature sensor is faulty.
Gas has to be measured by temperature as well as pressure, and the reason is that the injectors meter volume while the engine needs mass.
Pressure alone does not say how much fuel is in a given volume of vapour. The same pressure at 0 °C and at 60 °C carries substantially different mass, and it is mass that burns. So the module reads pressure and temperature together, and calculates from both — which is why losing either one produces the same symptom.
In practice this sensor is what keeps a gas conversion running correctly across the seasons, and its failure shows up as a car that was fine in spring and runs badly in high summer, or the reverse. A fault that tracks the weather is pointing here, and it is a pattern nobody reports as a pattern because the two events are months apart.
It is usually combined with the pressure sensor in one housing on the rail, so a fault in one often means the other is about to follow, and replacing the assembly settles both.
The base circuit fault: no plausible signal.
Waarschijnlijke oorzaken
Begin hier
- Brandstoftemperatuursensor defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
Minder vaak
- Onderbreking in de bedrading van de sensor · specialistisch
- Kabelboom beschadigd · specialistisch
- Referentiespanningsvoeding van de sensor uitgevallen · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2A4B.