Chrysler Ultradrive (41TE / 62TE)

automatic · transverse · 1989–2015

Also known as: ultradrive, 41te, a604, 40te, 62te, chrysler 4-speed automatic, 40tes, 41tes

Chrysler's electronically controlled four-speed automatic — the transverse Ultradrive / A604 / 41TE and its longitudinal cousin the 42RLE — in the Neon, Stratus, Sebring, PT Cruiser, Voyager, Grand Caravan, Journey, Liberty and the TJ and JK Wrangler.

Its reputation is among the worst of any automatic, and the reason is a fluid. These units require ATF+4 — a Chrysler specification, not a Dexron or Mercon equivalent — and they were filled with the wrong fluid on an industrial scale in their early years, by owners, by quick-fit shops and by dealers who did not yet stock it. The wrong fluid produces exactly the symptoms the transmission became notorious for: shudder on the 2–3 change, then slipping, then failure.

So the single most useful question about any of these is what fluid is in it, and the answer is very often unknowable — which is why a fluid and filter service with the correct specification is the first thing to do on an unknown example rather than the last.

Beyond fluid, the solenoid pack and the input and output speed sensors account for most electrical faults, and both produce a limp mode locked in second that reads as catastrophic and is not. A unit that has had ATF+4 all its life is a great deal better than the reputation suggests.

Cars fitted with this gearbox

15 generations. Only where a source names the model and the generation together — a gearbox is documented as a product far more often than as a fitment, so this list is deliberately shorter than the truth.

Chrysler

Dodge

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

The car — make, model, year and engine. The same fault behaves differently on each.
What you measured, not only what you replaced.
What actually fixed it — or that nothing did, which is worth knowing too.