ZF S5-31 (S5D 310Z / 320Z)

5-speed manual · longitudinal · 1990–2006

Also known as: s5-31, zf s5-31, s5d 310z, s5d310z, s5d 320z, s5d320z

ZF's five-speed manual for longitudinal BMWs, in the range from 1990 until 2006 — the 3, 5 and 7 Series, the E53 X5 3.0i and the larger-engined Z3.

BMW does not call it the S5-31, and knowing how to read BMW's own name for it saves a wrong order. The label says S5D 310Z, and every character is data: S manual, 5 five forward gears, D direct top gear, 310 the maximum input torque in Nm, Z for ZF. So the number on a BMW gearbox tag is its torque rating, not a model number — which is why the reinforced version built from September 1995 is the S5D 320Z, twenty newton-metres stronger and otherwise the same gearbox.

Its ratios make it a five-speed with a direct top, not an overdrive box: 4.21, 2.49, 1.67, 1.24 and 1.00, with 3.85 reverse. Fifth is 1:1. Anyone expecting a tall cruising gear from it is expecting the wrong gearbox — the final drive does that work on these cars.

It is the small-and-light one of the pair BMW used, about 39 kg, against the Getrag units fitted to other engines in the same models. The trade's reading is consistent and worth stating plainly: the ZF changes more notchily and the Getrag has the better synchros, while the ZF is the stronger of the two and is what BMW put behind the more powerful engines. Neither of those is a fault to be chased.

It takes about 1.3 litres. On a car this old that is small enough that a slow leak empties it well before anybody notices a level.

Cars fitted with this gearbox

1 generation. Only where a source names the model and the generation together — a gearbox is documented as a product far more often than as a fitment, so this list is deliberately shorter than the truth.

BMW

Z3 E36/7 and E36/8

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

The car — make, model, year and engine. The same fault behaves differently on each.
What you measured, not only what you replaced.
What actually fixed it — or that nothing did, which is worth knowing too.