P0D9E: Battery Charger A Coupler Lock Position Sensor Circuit
What to do
The car will probably refuse to charge even though the lock appears to work. Driving is unaffected. Mention that the lock seems to operate normally — it points at the sensor rather than the actuator and can save a part being replaced unnecessarily.
What this code means
The circuit for the sensor reporting the charging coupler lock's position is faulty.
Commanding a lock and confirming it locked are two different things, and this sensor is the difference.
The circuits at P0D91 drive the actuator. This one reports where the lock actually ended up — and the whole reason the car needs to know is the interlock argument at P0D91: it will not put current through a coupler it cannot confirm is secured.
So a position sensor fault has the same effect as a broken lock, with nothing mechanically wrong. The actuator moves, the pin engages, and the car refuses to charge because it has no evidence. That is a frustrating fault to diagnose by symptom alone, because everything visible works — and it is why the position sensor is worth checking before the actuator is replaced.
It is also what makes the Performance variant at P0D94 meaningful, since a command that reports success while the position never changes is only detectable by having both.
The circuit is open.
Likely causes
Start here
- Faulty charging coupler lock actuator · specialist
- Corroded or loose connector · specialist
Less common
- Open circuit in sensor wiring · specialist
- Water ingress into connector · specialist
- Damaged wiring harness · specialist
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P0D9E.