P2662: B Rocker Arm Actuator System Stuck On Bank 2
Do not keep driving
Stop driving it, particularly if a new tapping or ticking noise has appeared from the top of the engine — see P2647. The concern is camshaft and lifter damage, which turns a solenoid-sized repair into a cylinder head one.
What this code means
The B rocker arm actuator on bank 2 engaged and did not release. The consequences and the mechanical reason for not driving it are at P2647.
Likely causes
Start here
- Faulty rocker arm actuator · specialist
- Faulty valve lift control solenoid · moderate
- Low or dirty engine oil · easy
Less common
- Worn camshaft lobe or lifter · specialist
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P2662.