Também conhecido como: srod, s-rod, single rail overdrive, single-rail overdrive, rod 4-speed
Ford's Single Rail OverDrive four-speed — the manual gearbox the Fox-body Mustang launched with in 1979 and kept through 1982, and which stayed in the light trucks a few years longer.
The name describes the mechanism and it is the unusual part. Where almost every four-speed of the period moved its gears with three separate shift rails, the SROD uses one, with a single rail doing the selecting as well as the shifting. It is a departure from the H-pattern hardware around it, and it is why its internals do not resemble a Toploader's at all despite both being Ford four-speeds of the same decade.
It exists because of fuel economy rather than performance. The fourth ratio is an overdrive, added to drop motorway revs at a moment when that was the priority; the gearbox is a wide-ratio unit in an aluminium case with synchromesh on all four forward gears.
Its limit is the reason nobody keeps one. It was never rated much beyond 200 lb-ft, which is adequate behind the engines the 1979–1982 cars actually came with and nowhere near enough behind anything built since. A modified engine will destroy one, and the near-universal advice is to fit the Borg-Warner T-5 that replaced it from 1983.
That swap is not a drop-in. Going from an SROD to a T-5 means changing the flywheel and the bellhousing as well as the gearbox, and the speedometer drive gear with them — the SROD's is a different tooth count. Budget for all four.
Carros com este câmbio
1 geração. Apenas onde uma fonte nomeia o modelo e a geração juntos — um câmbio é documentado como produto muito mais do que como equipamento, então esta lista é deliberadamente menor que a realidade.
Ford
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Experiência da comunidade
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre SROD.