P0369: Camshaft Position Sensor B Circuit Intermittent — Bank 1
Do not keep driving
Expect intermittent roughness. Report when it happens — hot, cold, or over bumps.
What this code means
The bank 1 B camshaft signal is dropping out intermittently. Harness and connector faults dominate, and heat at the sensor mounting is a frequent contributor — watch live data through a road test rather than measuring statically.
Likely causes
Start here
- Intermittent wiring fault · moderate
- Corroded or loose connector · easy
- Faulty camshaft position sensor · moderate
Less common
- Heat damage to sensor or wiring · moderate
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P0369.