Skip to content

P2125 High Generic / SAE

P2125: Throttle/Pedal Position Sensor/Switch E Circuit

WhatsApp Telegram X Email

Do not keep driving

Expect reduced power or no throttle response. As with the other pedal sensor, the connector in the footwell is worth inspecting before the pedal assembly is quoted.

What this code means

A circuit fault in position sensor E — on most vehicles the second of the accelerator pedal's sensors, and the one that makes sensor D checkable.

The two are deliberately given different characteristics, as set out under P2104: different slopes, or one rising while the other falls, so that no single fault can move both in a way that still looks consistent. That is why a pedal has two sensors rather than one, and why the correlation codes at P2138 exist.

Everything under P2120 about the footwell environment and the sensors being integral to the pedal applies here unchanged.

Likely causes

Start here

Less common

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P2125.