Naar de inhoud

P050B Gemiddeld Generiek / SAE

P050B: Ontstekingstiming bij koude start — werking

WhatsApp Telegram X E-mail

Wat te doen

Ask what else is stored before this is treated as its own fault. The engine deliberately retards ignition on a cold start to heat the catalytic converter, and it will refuse to do that if it does not trust its timing or knock sensors — so another fault is often the real cause.

Mention when the spark plugs were last changed. Worn plugs make combustion marginal exactly when the strategy is asking most of it, and that alone can produce this.

Say whether the engine sounds rough or hunts for the first few seconds from cold. That is the window this covers.

Worth fixing even though the car drives normally warm — most of a car's harmful emissions are produced in that first minute.

Wat deze code betekent

The ignition timing retard the cold-start strategy commanded was not achieved.

Retarding the spark on a cold start looks like the opposite of tuning an engine well, and it is deliberate. Firing late means combustion is still happening as the exhaust valve opens, so heat leaves through the exhaust port instead of pushing the piston. That is exactly what a cold catalytic converter needs — the engine deliberately runs inefficiently for half a minute to light it off.

The retard is substantial, often far beyond anything used in normal running, which is why the engine sounds and feels different for the first few seconds.

This code says the module could not apply it, or applied it without the expected effect.

Three things commonly prevent it:

  • The module's timing authority is limited by another fault. A camshaft-to-crankshaft correlation problem, or a knock sensor fault, makes the module conservative — it will not add large retard when it cannot trust its position reference.
  • The engine will not run with the retard applied. Worn plugs, weak coils or poor fuel make combustion marginal, so the strategy backs off to avoid stalling.
  • The coolant temperature reading is wrong, so the strategy is never properly invoked.

Read the other stored codes before treating this as a fault in its own right. It is very often a consequence — the module choosing not to do something because of a problem elsewhere.

Waarschijnlijke oorzaken

Begin hier

Minder vaak

Symptomen

Betrokken onderdelen

Informatie, geen instructie

CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.

Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.

Ervaring uit de community

Wees de eerste die dit beschrijft

Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.

Wat het de moeite waard maakt:

  • De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
  • Wat je gemeten hebt, niet alleen wat je vervangen hebt.
  • Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.

Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P050B.