P0E39: Spanningssensor B van de DC/DC-omvormer — hoog
Wat te doen
The car will usually drive. Watch for the twelve-volt battery going flat over the following days — that is this fault's real symptom, and replacing the battery will not fix it. If the car has been slow to wake or needed a jump start, say so.
Wat deze code betekent
The circuit for one of the DC/DC converter's voltage sensors is faulty.
The DC/DC converter is the alternator's replacement, and the full argument for why that matters is at P0C38. In short: an electric car has no alternator, so every twelve-volt thing on it — lights, wipers, every control module — is fed by a converter stepping the traction pack down. When it stops, the twelve-volt battery is alone and the car dies within hours.
A converter has two voltage sides, and which one a sensor watches decides the entire diagnosis. The input side sees the traction pack at several hundred volts. The output side sees the twelve-volt system. A fault on the input is a battery or contactor problem; a fault on the output is a converter or twelve-volt problem, and they have nothing in common.
The standard does not say which of sensors A and B is which, and it varies by vehicle — the car's own documentation is the only authority. But the reading itself settles it in seconds: compare each sensor's live value against pack voltage and against the twelve-volt battery, and whichever it tracks is the side it watches. That is a free test worth doing before any part is ordered, because it decides which half of the car to work on.
At or above the upper limit.
Waarschijnlijke oorzaken
Begin hier
- DC-DC-omvormer defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
- Onderbreking in de bedrading van de sensor · specialistisch
Minder vaak
- Kabelboom beschadigd · specialistisch
- Referentiespanningsvoeding van de sensor uitgevallen · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0E39.