P2A48: Druksensor van tank C voor alternatieve brandstof — circuit laag
Wat te doen
The car will run on petrol, or on gas with worse economy. A gas system running lean can damage valve seats over time, so this is worth fixing rather than tuning around. Use an installer who works on these systems.
Wat deze code betekent
The circuit for the pressure sensor on gaseous fuel tank C is faulty.
Tank pressure on a gas system is not a fuel-level reading, and confusing the two is the mistake this family invites.
LPG in a tank is a liquid with vapour above it, and the pressure of that vapour is set almost entirely by temperature rather than by how much is left. A tank that is nearly empty and one that is nearly full read close to the same pressure at the same temperature — and the same tank reads perhaps 4 bar on a winter morning and 10 bar after a summer afternoon parked in the sun.
So the module needs this reading for two quite different jobs. It is how the system knows what pressure the gas will arrive at, which changes how long the injectors must be held open for a given quantity of fuel. And it is how the system detects a leak — a tank whose pressure falls when the temperature has not is losing its contents.
Level is measured separately (P2A5F), which is why both exist.
A pressure sensor that reads wrong therefore mis-fuels the engine rather than mis-reporting the gauge. Reading high, the module under-delivers and the engine runs lean, which on gas means high combustion temperatures and, over time, damaged valve seats. That is the expensive failure mode of a cheap sensor, and it is why a lean-running gas conversion is worth taking seriously rather than tuning around.
At or below the lower limit.
Waarschijnlijke oorzaken
Begin hier
- Tankdruksensor defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
- Onderbreking in de bedrading van de sensor · specialistisch
Minder vaak
- Kabelboom beschadigd · specialistisch
- Referentiespanningsvoeding van de sensor uitgevallen · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2A48.