Ook bekend als: n63b44, n63tu, 4.4 twin-turbo v8, 550i engine, x5 50i engine, 750i engine
BMW's 4.4 twin-turbo V8, and the engine that made the hot-vee layout ordinary: both turbochargers sit inside the V rather than outside it, which shortens the exhaust path and makes the car respond faster. It also traps a great deal of heat exactly where the valve gear lives, and most of this engine's reputation follows from that.
Oil consumption is the symptom that matters, and the valve stem seals are usually the cause. The seals sit at the top of each valve and keep oil in the head out of the combustion chamber; the heat of the hot vee hardens them early, and owners of the first cars report topping up by the quart. Do not read that as an engine that merely drinks oil — the same consumption starves the timing chain's tensioners, and a stretched chain on a V8 with the chain at the back is an engine-out job at best.
BMW's December 2014 recall covered timing chain stretch, fuel injectors, mass airflow sensors and crankcase vent lines on North American cars, and the 2012 technical update replaced the valve stem seals and revised the turbochargers — which is the clearest statement anyone has made about what the original ones did.
Which version matters more than the mileage. The original N63B44O0 is the one with the reputation; the N63TU of 2014 and the twin-scroll TU2 of 2016 progressively fixed it. Ask which the car has before reading anything into a service history.
Auto's met deze motor
11 generaties, bij 1 merk. Uit de samengestelde catalogus: een ontbrekende auto betekent dat de catalogus die nog niet bevat, niet dat de motor er nooit in zat.
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Berichten over deze motor
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over N63.