P2093: Camshaft Position Actuator A Control Circuit High — Bank 2
What to do
As P2089.
What this code means
Bank 2's intake camshaft actuator control circuit reads high — the direction with teeth, per P2089, on the second bank, with the one-bank coarseness of P2092 layered on top when the camshaft pins at its extreme.
Likely causes
Start here
- Wiring shorted to voltage · moderate
- Open or shorted solenoid winding · easy
Less common
- Control module driver failure · specialist
Symptoms
Components involved
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about P2093.