Skip to content

P2139 High Generic / SAE

P2139: Throttle/Pedal Position Sensor/Switch D/F Voltage Correlation

WhatsApp Telegram X Email

Do not keep driving

Ask which correlation pairs are faulted, and mention any wet footwell history. Between them, those two pieces of information usually settle whether this is a sensor, a supply, or water.

What this code means

Position sensors D and F disagree. The pedal-specific reasoning under P2138 applies — shared connector, shared environment, water as a common cause — and the three-way narrowing under P2136 applies to which pairs are failing.

On a three-sensor pedal the combination is unusually informative: D/E and D/F both failing while E/F passes identifies D, and all three failing points at the supply or the connector they share rather than at any sensor.

Likely causes

Start here

Less common

Symptoms

Components involved

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Community experience

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about P2139.