P06B9: Gloeibougie van cilinder 1 — circuit, bereik/werking
Wat te doen
If the glow plugs have been replaced recently, mention it and say whether they were original parts. Glow plugs are not interchangeable — they come in different resistances and voltages — and a plug of the wrong specification sets this fault while being brand new.
Ask for the connector and supply strap to be checked before the plug is condemned. Corrosion adds resistance that the module reads as a failing plug, and it is much cheaper to fix.
Expect hard starting and white smoke on cold mornings, and more so as the weather gets colder.
If plugs are being replaced, do the set and discuss the risk of one snapping off in the head first.
Wat deze code betekent
Cylinder 1's glow plug circuit is electrically valid but not behaving correctly.
Range/performance is the more informative half of the glow plug family, and it works by measuring resistance. A glow plug's resistance rises predictably as it heats, so the control module infers the plug's temperature from the current it draws — that is how it controls each plug individually rather than simply switching them on.
This code says the resistance is wrong for the conditions. Not open, not shorted: the plug is not heating the way a healthy one would.
Which points at three things.
- A plug degrading with age. The element changes resistance as it wears, so the module can no longer predict its temperature. This is ordinary wear and the commonest cause.
- Resistance in the supply. A corroded terminal or a tired strap adds resistance in series with the plug, which the module cannot distinguish from the plug itself changing. The connector is worth eliminating first because it is cheap.
- The wrong plug fitted. Glow plugs are not interchangeable — different resistances and different voltages exist, and a plug of the wrong specification is out of range from the moment it is installed.
That last cause is worth asking about wherever plugs have been replaced recently, especially with non-original parts. It sets this code on brand new hardware.
Waarschijnlijke oorzaken
Begin hier
- Gloeibougie uitgevallen · gemiddeld
- Hoge weerstand in de bedrading van de sensor · gemiddeld
- Gecorrodeerde of losse stekker · eenvoudig
Minder vaak
- Verkeerde gloeibougies gemonteerd · gemiddeld
- Regelmodule gloeibougies uitgevallen · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P06B9.