P06BA: Gloeibougie van cilinder 2 — circuit, bereik/werking
Wat te doen
Ask for all the glow plugs to be tested, not just this one. This kind of fault catches a plug that is drifting rather than one that has failed, and they age as a set — so the others are usually close behind, and the labour is the same whether one comes out or all of them.
Ask for the connector and supply strap to be checked first, since corrosion adds resistance the module reads as a failing plug.
Mention whether the plugs have been replaced before and whether they were original parts, since a plug of the wrong specification sets this while being new.
Expect hard starting and white smoke on cold mornings, getting worse as the weather cools.
Wat deze code betekent
Cylinder 2's glow plug circuit is electrically valid but not behaving correctly.
The module measures each plug's resistance to infer its temperature, and this one is not matching what a healthy plug would give.
Unlike the control circuit codes, this family runs consecutively — P06B9 through P06BE for cylinders 1 to 6 — which makes it the more predictable of the two glow plug sets. That is worth noting precisely because its sibling family does not, and mixing the two conventions up is how the wrong cylinder gets diagnosed.
The practical value of range/performance codes is that they catch a plug before it fails outright. A plug that has gone open or short is obvious; a plug drifting out of specification still works, badly, and this code is the early warning.
Which makes a single range/performance code a good moment to test the whole set rather than replace one plug. They age together, so one drifting usually means the others are close behind — and the labour and the snapping risk are the same whether one comes out or four do.
Check the supply connection first as always. Added resistance in the strap or connector is indistinguishable, from the module's point of view, from the plug itself changing.
Waarschijnlijke oorzaken
Begin hier
- Gloeibougie uitgevallen · gemiddeld
- Hoge weerstand in de bedrading van de sensor · gemiddeld
- Gecorrodeerde of losse stekker · eenvoudig
Minder vaak
- Verkeerde gloeibougies gemonteerd · gemiddeld
- Voedingsdraad gloeibougie gebroken · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P06BA.