P0E90: Spanningssensor B van de omvormer van aandrijfmotor A — circuit intermitterend/onregelmatig
Niet doorrijden
The car may refuse to move, or on a two-motor car may drive on one axle with reduced power. The car is declining to run a motor whose supply voltage it cannot verify, which is deliberate — it is not a fault to be cleared and driven through.
Wat deze code betekent
The circuit for the second voltage sensor on drive motor A's inverter is faulty.
A second voltage sensor on an inverter is not a spare, and the distinction decides what a fault here costs.
The inverter's first voltage sensor is at P0D2D (motor A) and P0DA3 (motor B), and it measures the direct-current supply arriving from the pack. This one is a second, independent measurement of the same thing — and the reason for it is the same reason the charger's output is measured twice at P0D4C: so that no single sensor failure can let the inverter operate on a number nobody has checked.
An inverter that misjudges its supply voltage sets its switching timings wrongly, and the consequences run from wasted energy through overheating to destroying the switching devices. Two sensors mean the module can detect a lie rather than act on it.
Which is why losing one usually stops the motor rather than degrading it. The car does not fall back to the surviving sensor — it declines to run a machine whose supply it can no longer verify. On a two-motor car that means one axle, and the vehicle will often still drive, which makes the fault easy to postpone and no less real.
Comes and goes; found by moving the harness with the reading live.
Waarschijnlijke oorzaken
Begin hier
- Vermogensomvormer defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
- Onderbreking in de bedrading van de sensor · specialistisch
Minder vaak
- Kabelboom beschadigd · specialistisch
- Referentiespanningsvoeding van de sensor uitgevallen · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0E90.