P265B: Positiesensor van tuimelaaractuator B — circuit, bereik/werking, bank 1
Wat te doen
Start with the oil, as with everything else in this family — level, grade, and when it was last changed. These actuators are worked by engine oil pressure through fine screens, and a slow-moving actuator and a failing sensor produce the same code, so an overdue service is a genuine possible answer here rather than a brush-off.
You may notice nothing at all. Depending on the engine this can mean slightly worse fuel consumption, a car that feels flat only at high revs, or no change you would ever detect.
Ask what the position sensor is part of before agreeing to replace it. On some engines it is a separate sensor on the outside; on others it is inside an assembly under the camshaft, and the two are very different bills.
Wat deze code betekent
The sensor reporting where the B rocker arm actuator on bank 1 has actually got to is producing a signal that is electrically valid and does not fit. The mechanism is at P2645; what B refers to on a particular engine is at P2650.
What is new on this page is the sensor, because most engines with these actuators do not have one. On the majority of variable-lift and cylinder-deactivation systems the module never sees the locking pin at all — it commands the solenoid and then infers success from an oil pressure switch, which is why P2646 spends its whole page on that switch and on the order in which to suspect it.
An engine carrying a dedicated position sensor is one whose designers wanted better than an inference, and that changes what this code is worth: it is the mechanism's own account of itself rather than a deduction from oil pressure somewhere near it.
Range/performance means the signal is present and wrong, and it fails in three recognisable ways:
- It never reaches the value the engaged or the released position should produce, so the pin is not travelling its full stroke.
- It gets there too slowly. These actuators are moved by engine oil pressure, so a marginal supply — hot idle, thin or degraded oil, a partly blocked screen — shows up as a transition the module times and rejects.
- It disagrees with everything else. The sensor claims one state while fuel trims, misfire counters or the oil pressure switch report the other.
Oil comes first here exactly as it does everywhere else in this family, and for a reason specific to this code: a slow actuator and a drifting sensor set the same code, and one of those two is a service rather than a repair.
Find out what the sensor is part of before anyone prices the job. On several of these engines it is built into the rocker or lifter carrier rather than bolted to the outside of it, so replacing the sensor can mean lifting the camshaft carrier — a completely different piece of work from the connector-and-wiring job the code sounds like.
Waarschijnlijke oorzaken
Begin hier
- Positiesensor van de tuimelaaractuator defect · gemiddeld
- Motorolie te laag of vervuild · eenvoudig
- Zeef in de klepliftmagneetklep verstopt · eenvoudig
Minder vaak
- Actuator van de tuimelaar defect · specialistisch
- Gecorrodeerde of losse stekker · eenvoudig
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P265B.