Veículo
SAIPA 151
The Pride as a pickup, and one of the most numerous working vehicles on Iranian roads — which makes it the reference population for the whole Pride family at commercial mileages rather than domestic ones.
It is mechanically the saloon, with the same 1.3 four-cylinder single-camshaft engine and the same front-wheel-drive layout, so Pride knowledge applies almost entirely. What differs is duty: a load bed changes the rear suspension, the driveline loading and the service interval that actually gets observed, and wear rather than failure is the normal finding on an engine and gearbox designed for a light hatchback and used to carry weight.
It gets its own page rather than being folded into the Pride for the same reason the pickup versions of every other car here do: the vehicle a reader is standing in front of is a pickup, its running population is commercial, and its complaints are not the saloon's. Bi-fuel conversion is very common, and on a converted car a lean or fuel-trim code says nothing about the fuel the engine was not running on.
Gerações
-
First generation 2011–present
The Pride with a load bed — the same 1.3 and the same layout, at commercial mileages and commercial duty.
- Carrocerias
- Pickup
- Plataforma
- Kia Pride
- Motores
-
- 1.3 SOHC — petrol · 48–52 kW (65–70 hp) · 105–110 Nm (77–81 lb-ft)
- 1.3 bi-fuel — CNG bi-fuel · very widely converted — the gas side must be considered alongside the petrol one. No output is written for the same reason as the Pride saloon's bi-fuel row: car.ir's bi-fuel Pride pages give 105 Nm at 3,000 against 103 at 2,500–2,800 on the petrol trims, which is a higher figure at a higher peak speed and therefore not a gas-mode rating, and khodrobank has no bi-fuel Pride page either — three of its 636 pages are bi-fuel and all three are a Samand or a Peugeot
- Câmbios
- 5-speed manual
- Tração
- Front-wheel drive
Informações de serviço
Informação, não instrução
O CarGeek é uma referência, não um manual de serviço. Suas páginas são escritas a partir de fontes públicas e do que outras pessoas constataram, nunca a partir da documentação de serviço do fabricante, de modo que podem estar erradas ou incompletas para o seu veículo específico. Parte do que descrevem envolve risco real: alta tensão, combustível sob pressão, energia acumulada e peças quentes ou em movimento.
Antes de agir com base em qualquer orientação, peça a verificação de uma pessoa com formação técnica, seguindo o procedimento do próprio fabricante para o seu veículo. Nada aqui substitui esse procedimento.
Publicações sobre o SAIPA 151
Seja o primeiro a documentar isto
Ainda não há publicações sobre isto. Vale a pena anotar tudo o que você descobriu — até um beco sem saída poupa a mesma tarde de outra pessoa.
O que faz valer a leitura:
- O carro — marca, modelo, ano e motor. A mesma falha se comporta de forma diferente em cada um.
- O que você mediu, não só o que trocou.
- O que realmente resolveu — ou que nada resolveu, o que também vale saber.
Entrar ou criar uma conta para adicionar o que você descobriu sobre SAIPA 151.