Also known as: k120, direct shift-cvt, direct shift cvt, launch gear cvt, toyota cvt with launch gear
Toyota's CVT for the TNGA cars — the Corolla, Camry, RAV4, Yaris, Avalon, Venza and Corolla Cross, and the Lexus ES and UX.
It is not an ordinary CVT, and the difference is mechanical rather than a matter of tuning: it has a real first gear. A conventional CVT pulls away on its belt, at the widest, least efficient and most heavily loaded ratio it ever runs. This one launches on a fixed gear and hands over to the belt at about 30 km/h, which is why it feels normal from rest where CVTs are usually at their worst.
That single fact redirects the commonest diagnosis on this transmission. A shudder or a hesitation only from a standstill is the launch gear and its clutch handing over, not belt slip; a slip or a flare at speed, under load, with the engine rising and the car not is the belt and pulleys. They are different faults in different parts, and treating a launch-gear symptom as belt wear condemns a transmission that is fine.
The recurring service theme is fluid and heat. Toyota's CVT fluid is specific, a CVT's belt clamping depends entirely on hydraulic pressure, and a fluid that has aged loses clamping before it loses anything else — which is felt as a slip under acceleration long before any noise. Towing and sustained hills are what age it.
The engine braking a driver expects is largely simulated. A CVT holding a "gear" on a descent is the control unit choosing a ratio; there is nothing to grind and nothing wearing unusually when it does.
Cars fitted with this gearbox
10 generations. Only where a source names the model and the generation together — a gearbox is documented as a product far more often than as a fitment, so this list is deliberately shorter than the truth.
Information, not instruction
CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.
Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.
Community experience
Be the first to write this up
Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.
What makes one worth reading:
- The car — make, model, year and engine. The same fault behaves differently on each.
- What you measured, not only what you replaced.
- What actually fixed it — or that nothing did, which is worth knowing too.
Sign in or create an account to add what you found about K120 (Direct Shift-CVT).