B00B3: Insassenklassifizierungssensor D des Fahrersitzes
Was zu tun ist
The passenger airbag may stay switched off. Try removing any seat cover, cushion or heater pad — these sensors weigh the seat and anything added confuses them. If the seat has been removed or replaced recently, it probably needs recalibrating.
Was dieser Code bedeutet
The driver seat occupant classification sensor D circuit is faulty.
Occupant sensing exists because a deploying airbag is dangerous to somebody in the wrong place, and the system has to know who is in the seat before it decides what to do.
The problem it solves is real and was learned expensively. Early airbags deployed at one force regardless of who was there, and they injured and killed children and small adults in crashes that would otherwise have been survivable. A bag inflating at three hundred kilometres an hour into someone sitting close to it is a weapon, which is why the industry moved to systems that can soften, delay or suppress deployment.
Two quite different questions are being asked, and the standard gives them separate codes. Classification asks who — an adult, a small adult, a child, a child seat, or an empty seat — and is answered mostly by weight. Position asks where — how far the occupant is from the airbag, and whether they are leaning into its path.
Both matter because either alone gives wrong answers. A heavy adult leaning forward is in as much danger from the bag as a light one sitting normally, and weight cannot see that.
Five sensors under one seat is a pattern, not five attempts at the same reading. Weight alone cannot distinguish a child seat strapped down hard from a small adult, but the distribution of that weight across the cushion can — a person's weight sits in two concentrated areas, a child seat's spreads across a rigid base.
Which is why losing one sensor matters more than losing one fifth of the information. The pattern is what the classification rests on, and a missing element leaves it ambiguous rather than merely less precise. The system falls back to the safe assumption and usually suppresses the airbag.
The wiring is the usual suspect. These sensors sit in a mat under the cushion with a harness that flexes every time the seat moves, and it is routinely damaged by objects pushed underneath.
Wahrscheinliche Ursachen
Hier anfangen
- Beschädigte Leitungen unter den Vordersitzen · Fachwerkstatt
- Sitzbelegungserkennungsmodul defekt · Fachwerkstatt
- Korrodierter oder loser Stecker · Fachwerkstatt
Seltener
- Sitzbezug oder Kissen beeinflusst den Sitzbelegungssensor · einfach
- Airbagsteuergerät defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu B00B3.