C0529: Kalibratie van de module van de stuurhoeksensor ontbreekt
Wat te doen
Expect the stability control light to be on, and drive as though the car has none — because it has.
The likely cause is something that has just been done to the car. A wheel alignment, steering or suspension work, a battery disconnection, or airbag and steering column work all lose the sensor's idea of where straight-ahead is.
If your car was aligned or had steering work recently, go back to whoever did it. This is usually a calibration step that was missed, not a fault — and it is a procedure rather than a part, so it should not cost much.
In the meantime the car steers and brakes normally. What you have lost is the electronic help that intervenes when a car starts to slide, so leave more room in the wet and avoid sudden corrections.
Wat deze code betekent
The steering angle sensor module has no stored calibration.
A steering angle sensor measures where the wheel is pointed, and "missing calibration" means it knows the angle but not which angle is straight ahead.
That reference is learned, not built in. The module has to be told the centre position, and it loses that knowledge whenever the relationship changes: a battery disconnection on some designs, a steering rack or column replaced, an airbag or clockspring job, or — most commonly — a four-wheel alignment, where the steering wheel ends up centred at a different rack position than before.
Stability control cannot work without it. The system compares where you are pointing against how the car is actually rotating; with no zero reference the first number is meaningless, so it switches off rather than intervene on a guess.
The repair is a procedure rather than a part, and that is worth knowing before anybody quotes for a sensor. Depending on the vehicle it is a scan-tool routine, a defined sequence of lock-to-lock turns, or a short drive in a straight line. A car that has just been aligned and now shows a stability light very often needs nothing more than that.
Why this page exists when its neighbours do not. Nothing in the public web documents this block — four independent searches established that on 2026-08-10. This code is written because a manufacturer named it, with its definition, in a technical service bulletin filed with the US road safety regulator, and that OEM wording agrees with the standard's own enumeration. Its neighbours have no such document, so they remain undocumented rather than guessed.
Waarschijnlijke oorzaken
Begin hier
- Sensor niet gekalibreerd na vervanging · gemiddeld
- Accu losgekoppeld of module opnieuw geprogrammeerd · eenvoudig
Minder vaak
- Gecorrodeerde of losse stekker · eenvoudig
- Wikkelveer in de stuurkolom defect · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over C0529.