P0D43: Uitgangsspanningssensor van de 14-voltacculader — circuit, bereik/werking
Wat te doen
The traction battery will charge normally. Watch for the 12-volt battery being weak after a long charge — that pattern, rather than going flat while parked, is what points here. A replacement 12-volt battery will not fix it.
Wat deze code betekent
The circuit for the sensor measuring the charger's 14-volt output is faulty.
The on-board charger feeds the 12-volt system too, and almost nobody knows it does. It is easy to assume the charger has one job — filling the traction pack — and that the 12-volt side is the DC/DC converter's business. But a car sitting on charge for eight hours has its modules awake the whole time, and if nothing fed the 12-volt battery it would be flatter at the end of the charge than at the start.
So the charger has a 14-volt output of its own, and this sensor is what regulates it. Fourteen volts rather than twelve because that is what actually charges a lead-acid battery; twelve is roughly what a charged one sits at.
The failure is quiet and cumulative. A car that charges its traction pack perfectly and comes back to a flat 12-volt battery is describing this circuit, and it is diagnosed as a tired 12-volt battery almost every time. The discriminator is that it happens after charging rather than after standing.
The signal is present and plausible but does not agree with what the rest of the system says it must be. This is the variant that finds a sensor drifting rather than failing, which is why it often appears long after the drift began.
Waarschijnlijke oorzaken
Begin hier
- Boordlader defect · specialistisch
- Gecorrodeerde of losse stekker · specialistisch
Minder vaak
- Onderbreking in de bedrading van de sensor · specialistisch
- Kabelboom beschadigd · specialistisch
- Referentiespanningsvoeding van de sensor uitgevallen · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P0D43.