P2278: Signalen van de lambdasondes verwisseld, bank 1 sensor 3 en bank 2 sensor 3
Wat te doen
This is almost always a wiring mistake rather than a failed part, and the fix costs nothing. Two sensors have been connected the wrong way round, which happens easily on a V engine because the leads reach both sides. If the exhaust, heat shields or sensors have been worked on recently, say so — that is when it happens. Ask for the connectors to be swapped back rather than for sensors to be replaced; new sensors plugged into the same crossed connectors behave identically.
Wat deze code betekent
The module has concluded that two sensors' connections are the wrong way round. This is an installation-error code — it exists because the mistake is common enough to be worth detecting, which makes it unusual and unusually cheap to fix.
How it happens. On a V engine the two rear sensors are the same part, their leads are similar lengths, and both connectors reach both sides. Once the exhaust or the underbody heat shielding is off, there is nothing physical preventing bank 1's sensor being plugged into bank 2's harness. Nothing complains at the time; the car starts and drives.
Why it is worth a code of its own rather than being left to show up as something else. Swapped sensors do not produce a broken reading, they produce a plausible one. Each bank is judged by the other bank's measurement, and since both banks normally behave similarly the values look entirely reasonable — until the banks diverge, at which point every correction is applied to the wrong side. The distinctive signature is fuel trims on the two banks moving in opposite directions and chasing each other, each correction making the other bank worse.
Without this code, that pattern is very hard to interpret and typically leads to sensors being replaced — which changes nothing, because the new ones get plugged into the same crossed connectors.
The fix is free. Swap the connectors back. The only thing worth doing alongside is checking that nothing else was crossed during the same job.
Waarschijnlijke oorzaken
Begin hier
Minder vaak
- Verkeerde zuurstofsensor gemonteerd · gemiddeld
- Kabelboom beschadigd · gemiddeld
Zeldzaam
- Defecte zuurstofsensor · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2278.