P2414: Lambdasonde — fout in uitlaatgasmonster, bank 1 sensor 1
Wat te doen
Expect worse economy and possibly a rough idle. This code says the exhaust reaching the sensor is not representative, which usually means a leak in the exhaust ahead of it rather than a failed sensor — so ask for the exhaust and the sensor's fitment to be inspected before a part is bought. If a spacer or anti-fouling adapter has been fitted to the sensor at any point, mention it: those change what the sensor sees and are a direct cause of this.
Wat deze code betekent
The upstream sensor on bank 1 is not receiving a representative sample of exhaust gas. The wording is precise and worth reading carefully: this code is about the sample, not about the sensor.
A sensor can be electrically perfect and chemically healthy and still report nonsense if what reaches it is not what left the cylinders. The ways that happens are physical and mostly visible:
- An exhaust leak upstream of it, drawing outside air in on each pressure pulse and diluting the sample. The corpus meets this repeatedly, and it belongs at the top of the list here too.
- The sensor not fully seated, or its threads not sealing, which lets air in at the sensor itself.
- A damaged or missing protective shield — the perforated tip that controls how gas flows across the element. Its geometry is part of the design, and a sensor fitted without it, or with it crushed, samples differently.
- An anti-fouling spacer fitted deliberately. These move the sensor out of the gas stream, and they exist largely to suppress catalyst efficiency codes. This code is one of the ways that shows up, and it is worth naming plainly: a spacer fitted to quieten P0420 is masking a fault rather than fixing one.
- A sensor of the wrong part number whose tip sits at a different depth.
So the diagnosis is a physical inspection of the exhaust and the installation before anything electrical, and this is one of the few oxygen sensor codes where a new sensor is unlikely to be the answer.
Waarschijnlijke oorzaken
Begin hier
- Uitlaatlek vóór de sensor · gemiddeld
- Zuurstofsensor niet correct ingedraaid · eenvoudig
Minder vaak
- Sensorafscherming beschadigd of afwezig · gemiddeld
- Antivervuilingsafstandhouder op de sensor gemonteerd · eenvoudig
- Verkeerde zuurstofsensor gemonteerd · gemiddeld
- Defecte zuurstofsensor · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2414.