P2631: Correctie van de pompstroom van de lambdasonde — circuit hoog, bank 2 sensor 1
Wat te doen
The car will drive normally with slightly worse economy and incomplete emissions monitors. If exhaust work has been done recently, a disconnected or swapped plug is the first thing to check, as at P2628.
If codes for both banks are stored together, say so explicitly. Two of these sensors do not fail at the same moment in the same way — what they share is a supply, an earth and the module reading them, and that is where a fault affecting both will be. It is worth ruling out before either sensor is bought.
Wat deze code betekent
The pumping current trim circuit reads above its valid range on the bank 2 upstream sensor — an open circuit, a disconnected connector, or a short to supply. The mechanism is at P2626 and the exhaust-work argument at P2628.
Where both banks show trim faults at once, stop treating them as two sensor problems. Two sensors do not fail simultaneously in the same way. What they share is the module that reads them and the supply and earth that feed both, so a common supply or a module input stage is the explanation that fits — the corpus's most repeated argument, and it is as true here as it is of a reference voltage or an injector group supply. Replacing two sensors to fix one shared fault is an expensive way to find that out.
Waarschijnlijke oorzaken
Begin hier
- Sensorstekker losgeraakt · eenvoudig
- Onderbreking in de bedrading van de sensor · gemiddeld
- Gecorrodeerde of losse stekker · eenvoudig
Minder vaak
- Referentiespanningsvoeding van de sensor uitgevallen · gemiddeld
- Defecte zuurstofsensor · gemiddeld
- Bedrading kortgesloten met spanning · gemiddeld
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2631.