P2671: Voedingsspanning B van de actuatoren — circuit hoog
Wat te doen
Expect warning lights and probably reduced power. It is safe enough to drive gently to a workshop, but do not leave it for weeks — parts on this circuit may be powered when they should be resting, and some of them do not tolerate that indefinitely.
Ask for one quick check before anything else: the charging system voltage. An alternator or regulator pushing the whole vehicle's voltage too high puts every supply out of range at once and produces exactly this. It takes a couple of minutes at the battery and rules out a whole investigation.
Otherwise this is usually a chafed loom letting two circuits touch, or a relay whose contacts have welded closed so the supply never switches off. As with the rest of this family, do not replace the parts named by the other codes — they are reporting a supply problem, not their own.
Wat deze code betekent
The second actuator supply rail reads above its valid range — a short to a higher supply, or a rail that is live when the module commanded it off.
The rail's function and the confusing pattern of codes it produces are described at P2669.
A rail that is high when it should be off is the reading with a consequence beyond this code, and it is worth understanding. The module switches these rails deliberately: actuators are powered down when they should be idle, both to save current and so the module can test the circuit. A rail stuck live leaves solenoids energised when nothing intends them to be — a valve held open, a heater left on, a motor driven against its stop — and those are conditions the parts were not designed to hold indefinitely.
The commonest mechanism is the same one that causes a great many high-circuit faults on a vehicle: a chafed loom putting two circuits together. Where a bundle rubs through against a bracket, the exposed conductors are neighbours in the same bundle, so a supply wire finds a signal wire rather than finding earth. That is why a high-circuit code often arrives with faults on entirely unrelated circuits that happen to run in the same loom.
A welded relay contact is the other route, and it produces the cleaner version — the rail simply never turns off.
Overcharging is worth ruling out before anything is dismantled. A charging system pushing the whole vehicle's supply too high puts every rail out of range at once, and that is a five-minute measurement at the battery rather than a wiring investigation.
Waarschijnlijke oorzaken
Begin hier
- Bedrading kortgesloten met spanning · gemiddeld
- Kabelboom beschadigd · gemiddeld
- Voedingsrelais van de module defect · gemiddeld
Minder vaak
- Overspanning in het laadsysteem · gemiddeld
- Motormanagementmodule defect · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over P2671.