U0410: Ongeldige gegevens ontvangen van de regelmodule A brandstofpomp
Wat te doen
The engine will probably run, but do not set off on a long journey until the fuel pressure has actually been measured — a fuel delivery fault can leave you stranded with little warning.
Ask for the fuel pressure to be measured with a gauge rather than read from the scan tool. That one measurement separates two very different problems: a sensor reporting wrongly on a healthy fuel system, or a genuine fuel supply problem that the sensor is honestly reporting. They lead to completely different repairs.
Mention any of these, because they point at a genuinely tiring pump: hesitation under load, difficulty starting when the engine is hot, or a whining noise from the fuel tank area. This module measures how hard the pump is working, and a pump drawing more current than it should is one that is wearing out — which makes this code an unusually early warning, worth acting on rather than clearing.
A blocked fuel filter is also worth ruling out, since it is cheap and produces the same low-pressure picture.
Wat deze code betekent
The fuel pump control module is broadcasting data that cannot be accepted as true. See U0400 for the family's framing.
A fuel pump stopped being a simple on-or-off device when manufacturers began varying its speed, and that is why it has a module. Running the pump only as hard as the engine needs reduces electrical load, keeps the fuel cooler, and extends the pump's life — so the module drives it at a commanded rate and reports back the pressure achieved and the current drawn.
Those two reported values are the substance of this code, and each has a distinct meaning worth separating.
A pressure report that cannot be true may be a failing pressure sensor, or it may be an honest report of a genuine fuel delivery problem — the U0400 point about data sometimes being accurate. A blocked filter, a failing pump or a restricted line produces real pressure the module correctly reports and the engine module correctly rejects as insufficient.
A current report that cannot be true is the more informative one. A pump drawing far more current than commanded is a pump wearing out — increasing friction as bearings and vanes wear — and this is one of the few places where a module's own report gives early warning of a mechanical failure. A vehicle that has been hot-starting poorly or hesitating under load, with this code stored, is very likely reporting a genuinely tiring pump.
So the practical advice is to have the actual fuel pressure measured rather than inferred, because that single measurement distinguishes a sensor problem from a fuel supply problem, and they lead to completely different repairs.
One caution worth stating: a fuel pump that is being under-driven or over-driven because of this fault can leave a driver stranded without much warning. The corpus marks this as drivable because the engine runs, but a long journey is not a good idea until the pressure has been checked.
Waarschijnlijke oorzaken
Begin hier
- Verstopt brandstoffilter · eenvoudig
- Lage brandstoftoevoerdruk · gemiddeld
- Gecorrodeerde of losse stekker · eenvoudig
Minder vaak
- Regelmodule brandstofpomp defect · specialistisch
- Kabelboom beschadigd · gemiddeld
- Ingang van de ontvangende module defect · specialistisch
Symptomen
Betrokken onderdelen
Informatie, geen instructie
CarGeek is een naslagwerk, geen werkplaatshandboek. De pagina's zijn geschreven op basis van openbare bronnen en van wat anderen hebben ondervonden, nooit op basis van de servicedocumentatie van de fabrikant zelf, dus ze kunnen onjuist of onvolledig zijn voor jouw specifieke voertuig. Een deel van wat erin staat brengt echt gevaar met zich mee: hoogspanning, brandstof onder druk, opgeslagen energie en hete of bewegende delen.
Laat alles waarnaar je wilt handelen eerst controleren door iemand met een technische opleiding, aan de hand van de eigen procedure van de fabrikant voor jouw voertuig. Niets hier vervangt die procedure.
Ervaring uit de community
Wees de eerste die dit beschrijft
Hierover is nog niets geplaatst. Wat je ook hebt gevonden, het is het opschrijven waard — zelfs een doodlopend spoor bespaart iemand dezelfde middag.
Wat het de moeite waard maakt:
- De auto — merk, model, bouwjaar en motor. Dezelfde storing gedraagt zich per auto anders.
- Wat je gemeten hebt, niet alleen wat je vervangen hebt.
- Wat het echt verholpen heeft — of dat niets dat deed, wat ook nuttig is om te weten.
Inloggen of een account aanmaken om toe te voegen wat je hebt gevonden over U0410.