U0410: Données non valides reçues du calculateur A de pompe à carburant
Que faire
The engine will probably run, but do not set off on a long journey until the fuel pressure has actually been measured — a fuel delivery fault can leave you stranded with little warning.
Ask for the fuel pressure to be measured with a gauge rather than read from the scan tool. That one measurement separates two very different problems: a sensor reporting wrongly on a healthy fuel system, or a genuine fuel supply problem that the sensor is honestly reporting. They lead to completely different repairs.
Mention any of these, because they point at a genuinely tiring pump: hesitation under load, difficulty starting when the engine is hot, or a whining noise from the fuel tank area. This module measures how hard the pump is working, and a pump drawing more current than it should is one that is wearing out — which makes this code an unusually early warning, worth acting on rather than clearing.
A blocked fuel filter is also worth ruling out, since it is cheap and produces the same low-pressure picture.
Ce que signifie ce code
The fuel pump control module is broadcasting data that cannot be accepted as true. See U0400 for the family's framing.
A fuel pump stopped being a simple on-or-off device when manufacturers began varying its speed, and that is why it has a module. Running the pump only as hard as the engine needs reduces electrical load, keeps the fuel cooler, and extends the pump's life — so the module drives it at a commanded rate and reports back the pressure achieved and the current drawn.
Those two reported values are the substance of this code, and each has a distinct meaning worth separating.
A pressure report that cannot be true may be a failing pressure sensor, or it may be an honest report of a genuine fuel delivery problem — the U0400 point about data sometimes being accurate. A blocked filter, a failing pump or a restricted line produces real pressure the module correctly reports and the engine module correctly rejects as insufficient.
A current report that cannot be true is the more informative one. A pump drawing far more current than commanded is a pump wearing out — increasing friction as bearings and vanes wear — and this is one of the few places where a module's own report gives early warning of a mechanical failure. A vehicle that has been hot-starting poorly or hesitating under load, with this code stored, is very likely reporting a genuinely tiring pump.
So the practical advice is to have the actual fuel pressure measured rather than inferred, because that single measurement distinguishes a sensor problem from a fuel supply problem, and they lead to completely different repairs.
One caution worth stating: a fuel pump that is being under-driven or over-driven because of this fault can leave a driver stranded without much warning. The corpus marks this as drivable because the engine runs, but a long journey is not a good idea until the pressure has been checked.
Causes probables
Commencez ici
- Filtre à carburant colmaté · facile
- Pression d'alimentation en carburant basse · modérée
- Connecteur corrodé ou mal enclenché · facile
Moins fréquent
- Calculateur de pompe à carburant défectueux · spécialisée
- Faisceau de câblage endommagé · modérée
- Entrée du calculateur récepteur défectueuse · spécialisée
Symptômes
Composants concernés
Des informations, pas des instructions
CarGeek est un ouvrage de référence, pas un manuel d'atelier. Ses pages sont rédigées à partir de sources publiques et de ce que d'autres ont constaté, jamais à partir de la documentation technique du constructeur ; elles peuvent donc être erronées ou incomplètes pour votre véhicule précis. Une partie de ce qu'elles décrivent présente un risque réel : haute tension, carburant sous pression, énergie accumulée, pièces chaudes ou en mouvement.
Avant d'agir sur quoi que ce soit, faites-le vérifier par une personne formée, en suivant la procédure du constructeur pour votre véhicule. Rien ici ne remplace cette procédure.
Expérience de la communauté
Soyez le premier à en faire le compte rendu
Rien n'a encore été publié à ce sujet. Tout ce que vous avez trouvé mérite d'être noté — même une impasse épargne à quelqu'un le même après-midi.
Ce qui rend un compte rendu utile :
- La voiture — marque, modèle, année et moteur. La même panne ne se comporte pas pareil sur chacune.
- Ce que vous avez mesuré, pas seulement ce que vous avez remplacé.
- Ce qui a réellement résolu le problème — ou que rien ne l’a résolu, ce qui est utile aussi.
Se connecter ou créer un compte pour ajouter ce que vous avez trouvé à propos de U0410.