Skip to content

Steering Angle Sensor

Measures where the driver has pointed the steering, which makes it the only input to stability control that describes intent rather than what the car is doing — everything the system decides comes from comparing the two. It reads against a learned straight-ahead position, and that learned zero is wiped by a wheel alignment, steering or suspension work, a clockspring, and on many vehicles a battery disconnection. Until it is recalibrated the car believes it is being steered while going straight, which is why a stability warning appearing right after a tracking job is usually a few minutes with a scan tool rather than a part.

Also known as: sas, steering position sensor, steering wheel angle sensor, steering sensor

Referenced by 21 codes

WhatsApp Telegram X Email

Codes involving this component (21)

Other components in Braking, Steering and Suspension

Information, not instruction

CarGeek is a reference, not a service manual. Its pages are written from public sources and from what other people have found, never from a manufacturer's own service information, so they can be wrong or incomplete for your particular vehicle. Some of what they describe carries real risk: high voltage, fuel under pressure, stored energy, hot and moving parts.

Have anything you intend to act on checked by a trained person against the manufacturer's own procedure for your vehicle. Nothing here replaces that procedure.

Working on this component

Be the first to write this up

Nothing posted about this yet. Whatever you found is worth writing down — even a dead end saves someone the same afternoon.

What makes one worth reading:

  • The car — make, model, year and engine. The same fault behaves differently on each.
  • What you measured, not only what you replaced.
  • What actually fixed it — or that nothing did, which is worth knowing too.

Sign in or create an account to add what you found about Steering Angle Sensor.