B0087: Gurtkraftbegrenzer dritte Reihe Mitte — Zündansteuerung
Was zu tun ist
Get this looked at promptly, and do not attempt it yourself. A restraint fault usually means the whole system has switched itself off, so the airbags and pretensioners may not fire in a crash — the car drives normally and is far less able to protect you. Never probe airbag wiring with a multimeter: the current an ordinary meter uses can set off the charge.
Was dieser Code bedeutet
The deployment loop for the third row centre seat belt load limiter is faulty.
A load limiter is the part of a seat belt designed to let go, which is the opposite of what most people assume a belt does.
A belt that simply held firm would stop the chest against a band of webbing hard enough to break ribs — in a severe crash the belt itself becomes the injury. So after the pretensioner has removed the slack, the limiter releases webbing back out at a controlled force, spreading the deceleration over a longer distance and capping the load the chest ever sees.
It works with the airbag rather than beside it. The belt lets the occupant travel just far enough to meet the bag, and the bag catches what the belt let go. The two are tuned as one system, which is why a limiter fault matters even though the belt still restrains.
The pyrotechnic element is what makes it switchable. A plain limiter is a torsion bar that yields at one fixed force for everybody; a switchable one changes that force in the moment for a large or a small occupant. That charge is what the module monitors, and what this code reports.
A numbering note worth carrying. The load limiters run left, centre, right across each row — B0083–B0085 for the second row, B0086–B0088 for the third. The pretensioners in the same block run left, right, centre. Two device families, two conventions, no marker saying so, and one group at B00E6–B00E8 that breaks even its own. Read the title rather than counting positions from a neighbour.
Wahrscheinliche Ursachen
Hier anfangen
- Korrodierter oder loser Stecker · Fachwerkstatt
- Beschädigte Leitungen unter den Vordersitzen · Fachwerkstatt
- Gurtstraffer defekt · Fachwerkstatt
- Leitungsbruch im Auslösekreis des Airbags · Fachwerkstatt
Seltener
- Airbagsteuergerät defekt · Fachwerkstatt
Symptome
Beteiligte Bauteile
Information, keine Handlungsanweisung
CarGeek ist ein Nachschlagewerk, kein Werkstatthandbuch. Die Seiten entstehen aus öffentlichen Quellen und aus dem, was andere festgestellt haben, nie aus den Serviceunterlagen des Herstellers; für Ihr konkretes Fahrzeug können sie daher falsch oder unvollständig sein. Ein Teil des Beschriebenen birgt echte Gefahren: Hochspannung, Kraftstoff unter Druck, gespeicherte Energie sowie heiße oder bewegte Teile.
Lassen Sie alles, wonach Sie handeln wollen, von einer fachlich geschulten Person anhand der herstellereigenen Vorgehensweise für Ihr Fahrzeug prüfen. Nichts hiervon ersetzt diese Vorgehensweise.
Erfahrungen der Community
Schreiben Sie den ersten Erfahrungsbericht dazu
Dazu wurde noch nichts veröffentlicht. Was immer Sie gefunden haben, ist es wert, aufgeschrieben zu werden — selbst eine Sackgasse erspart jemandem denselben Nachmittag.
Was einen Bericht lesenswert macht:
- Das Fahrzeug — Marke, Modell, Baujahr und Motor. Derselbe Fehler verhält sich auf jedem anders.
- Was Sie gemessen haben, nicht nur, was Sie getauscht haben.
- Was es tatsächlich behoben hat — oder dass nichts es behoben hat, was ebenso nützlich ist.
Anmelden oder ein Konto anlegen und eintragen, was Sie gefunden haben — zu B0087.